ARH Inc.

FXCAM container cameras
for container code recognition applications

It is a critical issue to provide an ACCR system images of appropriate quality level. Our Ultra Low Lux B/W cameras provide high resolution and high intensity for day or night images.

Automatic Container Code Recognition (ACCR)

To provide optimal conditions for taking an image, white light LED illuminator(s) device is used with the FXCAM CONTAINER camera. The two illuminators are built up of low power consumption LED's and works as a flash.

Therefore the power consumption is only about 10W while the light emission is 2000W. When the light flashes the camera takes an image of the passing container's code, which will be transmitted through analogue video.

The FXCAM CONTAINER CAMERA is an all in one unit including a camera, auto iris optic and the synchronizer of the 2000 Watts light flash illuminator(s) special designed and optimized for the identification applications.

The effective range of the equipment is from 1.5 meters up to 3.5 meters, but it may vary depending on the environment (weather, sunlight, fog, etc.) conditions and the quality of the container code.

FXCAM CONTAINER unit includes the following components
- High resolution ultra low lux B/W Camera
- Synchronizer unit for the white LED illuminator(s)
- High quality lens
- Weather proof housing
- Wall mountable bracket
- Internal heating with thermostat

The FXCAM has primarily been designed for recognition applications (access control). However the FXCAM can be perfectly applied in many other applications where outstanding image quality is needed.

If you have any questions on ACCR, please click here and send us an email

Technical Specifications of FXCAM container camera

Automatic Container Code Recognition (ACCR)
Specifications of the camera unit
Imaging device 1/3" interline transfer Exview HAD CCD, B&W
Picture elements 768 x 576 pixels
(effective PAL/2 768 x 288)
Sensing area 6.3mm (H) x 4.7mm (V)
Scanning system 625 lines, 2:1 interlaced
Horizontal resolution 570 TV lines
S/N ratio 48dB AGC OFF
Synch system Internal
Output signal PAL 1Vp-p 75 Ohm
Shutter time Factory preset (configurable with jumpers)
· 1:10 000 s for even fields
· 1:100 000 s for odd fields
Weight of camera unit
(without bracket)
net: 4.5 kg, gross: 6.0 kg
Dimensions of camera unit
(without bracket)
240 x 178 x 196 mm
Specifications of the illuminator units
Type of illuminators Visible white LED illuminators
Pulse power per illuminator 2000W, white LED
Operating temperature -20?C - +65?C
Weight of illuminator units
(without bracket)
net: 4.5 kg, gross: 6.0 kg
Dimensions of illuminator units
(without bracket)
240 x 178 x 196 mm
Other specifications
Cable RG 59 coaxial
Power supply unit Optional
Power consumption · 24-36V DC or 24-28V AC (50-60Hz)
· 25W-35W (including light flash and heating)
· Reverse polarity protection
· Automatic internal heating with thermostat
IP class IP 66
Technical specifications are subject to change without prior notice

Technical Specifications of FXCAMd 103 digital container camera

Automatic Container Code Recognition (ACCR)
Specifications of the camera unit
Interface Ethernet
Camera Sensor B&W, Global shutter CMOS
Resolution 752x480, ROI support
Lens motorized, 6-36mm
Iris SW adjustable
Focus SW adjustable
Operational range up to 6m (due to illumination)
Illumination Built-in white light LED 40°
LED intensity SW adjustable time & voltage
Synch system Internal
Frame Rate per second 60 FPS
Communication speed ~20 FPS
Shutter time SW adjustable
· 1/100 s max
· 1/30000s min
Communication interface Ethernet cable
Output RAW images
Ports · RS232/ Serial - reserved for extra illuminator
· GPIO trigger - reserved for extra illuminator
Power input Reverse polarity protection
AC 24-28V AC
DC 30-36V DC
Consumption 16-18W max
Compliances CE, FCC, RoHS
Temperature Range -20°C to +55°C
IP class IP 67
Dimensions (inc.sunshield) 330 x 157 x 150 mm
Weight (inc.sunshield, w/o bracket) 4.0 kg
Default housing color RAL 9007
Sunshield Included
Wall mount bracket Included
Supported OS Windows, Linux
Specifications of the illuminator unit(s)
Illumination White light LED 40° (270pcs)
LED intensity SW adjustable time & voltage
Synch system through RS232
Communication interface RS232
Power input 24-28V AC, 30-36V DC
Consumption 8W max
Compliances CE, RoHS
Temperature Range -20°C to +55°C
IP class IP 67
Dimensions (inc.sunshield) 250 x 157 x 150 mm
Weight (inc.sunshield, w/o bracket) 2.4 kg
Default housing color RAL 9007
Sunshield Included
Wall mount bracket Included
Supported OS Windows, Linux
Technical specifications are subject to change without prior notice

Feel free to contact us

If you have any questions on ACCR, please click here and send us an email

KEYWORDS: industrial camera | speed camera | anpr camera | fxcam | number plate recognition | container code recognition | speed enforcement | anpr | accr | adr | automatic number plate reading | automatic container code reading |